|
       
Untitled Document
|
Home >
Products > Sprinklers > Sprinklers >
| Senninger Pivot-Master® Impacts |
|
Features and Benefits
• Six-degree trajectory fights wind drift and evaporation.
• Enclosed splasharm spring and bearing for protection from the elements.
• Operating pressure – 25 to 70 psi
• Color coded nozzles for easy size identification.
• 3/4" brass swivel for use in galvanized steel fittings.
• Double nozzle models available for good low-pressure performance; better distribution and increased flow.
|
 |
Pivot-Master® Impact Sprinklers
Includes nozzle; specify desired nozzle size. |
|
NI Part #
|
Description
|
Nozzles*
in 1/64"
|
Flow in gpm
|
Diameter** in ft.
|
|
|
Sprinkler, Impact, 6º, Single Nozzle, with 3/4" M NPT Brass Swivel, 3006-1PM |
#7 - 9
|
1.7 - 4.8
|
64-98
|
|
|
Sprinkler, Impact, 6º, Single Nozzle, with 3/4" M NPT Brass Swivel, 4006-1PM |
#10 - 12
|
3.5 - 8.6
|
71-106
|
|
|
Sprinkler, Impact, 6º, Single Nozzle, with 3/4" M NPT Brass Swivel, 5006-1PM |
#13 - 18
|
6.0 - 18.8
|
73-122
|
|
|
Sprinkler, Impact, 6º, Double Nozzle, with 3/4" M NPT Brass Swivel, Brass Stem, 5006H-2PM |
#13 - 18 range
#7 - 18 spreader
|
6.8 - 25.6
|
82 - 112
|
* These are the recommended nozzle sizes for maximum product life and maintaining a consistent rotation speed. Incorrect nozzle placement may cause excessive wear and / or incorrect rotation speed.
** Diameter at 12 ft. height.
Impact Sprinkler,
Single Nozzle
92838, 92839 or 92813
|
Impact Sprinkler
Double Nozzle
92807
|
| Pivot-Master® Impacts Typical Installations |
|
|
Typical Installations
(cross section view of pivot mainline)
Note: Brass swivel is recommended for use in galvanized steel fittings. |
 |
|
|
|
|
|
|
| |
Pivot-Master® Impacts Components
| Pivot-Master® Impacts Components |
|
NI Part #
|
Description
|
|
|
Nozzle (specify size)
|
|
|
Nozzle Holder
|
|
|
Vane
|
| |
|
|
